hot dipped galvanized welded mesh panel (ISO9001)

Steel Bar Welded Wire Mesh ISO9001:2008,UKAS Opening:75mm ~ 300mm Length:1m ~ 14m,width:1m ~ 3m Wire diameter:5mm ~ 16mm

 Steel Bar Welded Wire Mesh Panel is made of superior quality steel bar, with flat even surface, firm structure.  This process technology is one of the ten new construction technology in 2005. It is widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, wall, etc.

Material:	Heated crimped round, electro galvanized round, heated crimped with rib, electro crimped with ribs
Process:	welding
Opening:	75mm ~ 300mm
Length:	1m ~ 14m
Width:	1m ~ 3m
With coating:	5mm ~ 16mm
Packing:	naked

Information

Features of reinforcing mesh The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width controlFerro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as requiredManufactured from hard drawn wire (smooth) and cold rolled wire (deformed)All intersections are resistant-welded thereby not reducing the tensile strength of the wiresMesh has an average shear strength equal to 80% of the wire strengthThe wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductilityThe steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of 510Mpa and a high resistance to fatigueMesh is available in black (pre-galvanised) and galvanised sheets or rollsAlso available on request: plastic coated and hot dipped (galvanised) mesh Quality ControlReinforcing mesh is produced to highest quality standards and complies to ISO 9002. Thorough testing of wire strength, welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure that highest standards are maintained. Standard SizesReinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes. Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm. Special MeshSpecialized machinery is used to produce weld mesh with non-standard aperture sizes. The spacing of wires in either direction is variable between 25mm and 150mm. Customized mesh is available on request according to specifications provided.the Reinforcing Mesh Data Sheet Standard sizes of welded mesh fabricSpecifications: Sheets: 6m x 2,4m or Rolls: 60m x 2,4mBased on SABS 1024/2006 specifications for welded steel fabric for concrete reinforcement

hot dipped galvanized welded mesh panel (ISO9001)